- Posts: 1
- Karma: 1
- Thank you received: 0
Troque Specs and oil type for Craftsman 106175110
- Rizzym
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 2 months ago #1200
by Rizzym
Troque Specs and oil type for Craftsman 106175110 was created by Rizzym
Looking for torque spec for head bolts and bearing cap. Also changing the oil. what oil can I use. and how much? Would like to use synthetic oil. would like a link or pdf on a repair manual I have all the parts breakdowns of this model. now looking for torque specs, oil specs, repair manual. Thank you for all your help in advance.
Model 106.175110 serial num 00084 Craftsman Sears twin cylinder compressor
Thank You, Mark Rizzy
Model 106.175110 serial num 00084 Craftsman Sears twin cylinder compressor
Thank You, Mark Rizzy
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 2 months ago - 9 years 2 months ago #1210
by MTR-Admin
Replied by MTR-Admin on topic Troque Specs and oil type for Craftsman 106175110
Thank you for the post Mark.
I don't have a repair manual per se, as this is a 1974 model and I just don't have access to this any longer. However, I do have a full breakdown of the pump which I've attached below. For more detailed technical help with this you can call the manufacturer directly at 800-543-6400 (Campbell Hausfeld actually made this unit for Sears).
The Torque specs are below:
Head Bolts = 120-150 in/lbs
Bearing Cap = 55 in/lbs
As for oil, use straight 30 weight air compressor oil. When ambient temps dip below 36 degrees use a 20 weight. You can use synthetic oil, but compressor synthetic is best.
I hope this helps!
- MTR
I don't have a repair manual per se, as this is a 1974 model and I just don't have access to this any longer. However, I do have a full breakdown of the pump which I've attached below. For more detailed technical help with this you can call the manufacturer directly at 800-543-6400 (Campbell Hausfeld actually made this unit for Sears).
The Torque specs are below:
Head Bolts = 120-150 in/lbs
Bearing Cap = 55 in/lbs
As for oil, use straight 30 weight air compressor oil. When ambient temps dip below 36 degrees use a 20 weight. You can use synthetic oil, but compressor synthetic is best.
I hope this helps!
- MTR
Last edit: 9 years 2 months ago by MTR-Admin.
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.045 seconds