Old Campbell Hausfeld model GP7512 compressor

8 years 9 months ago #1424 by seaon815
Old Campbell Hausfeld model GP7512 compressor was created by seaon815
Hi, looking for any parts diagram or owners manual. I know I need an air filter and may need other parts as well. Also wondering if this unit has enough capacity to drive a 1/2" impact wrench on an occasional basis.
Thanks!

Please Log in or Create an account to join the conversation.

8 years 9 months ago #1427 by MTR-Admin
Replied by MTR-Admin on topic Old Campbell Hausfeld model GP7512 compressor
Thanks for the post!

I've attached a parts diagram and parts list below for your reference. Since this is a very old model, most parts are probably not available any longer.

This unit produces around 4-5 SCFM @ 90 PSI so technically it can run an impact, but it will NOT run a 1/2" impact at maximum torque....it's just too small of a compressor.

Since the Air Filter isn't available any longer (as far as I know), your best bet is to simply purchase some thick felt and use this as a filter element.

Let me know if there is anything else you need to know and I'll do my best to obtain the info.

- MTR
Attachments:

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.046 seconds