- Posts: 4
- Karma: 2
- Thank you received: 0
what nailer to buy on a tight budget?
- chriscom32
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 2 months ago #1217
by chriscom32
chriscom32
:} :}
what nailer to buy on a tight budget? was created by chriscom32
Good day to all, i am in the market for a new or used 18 gauge nailer/stapler ,i have a central pneumatic 2 in 1,nailer but after checking the rings ,i discovered a tiny crack on the housing,so i decided to look for a nailer ,i am looking for 1 that parts are readily available but within $20-30 . Any suggestions ???
If anyone has a central pneumatic model 68019 and it's not working ,i'll be willing to take in of their hands for parts.
If anyone has a central pneumatic model 68019 and it's not working ,i'll be willing to take in of their hands for parts.
chriscom32
:} :}
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 2 months ago #1219
by MTR-Admin
Replied by MTR-Admin on topic what nailer to buy on a tight budget?
Other than Harbor Freight's Central Pneumatic nailers I have no idea how you will find a nailer/stapler that cheap; I honestly don't think you will find one new at that price. I would recommend looking on eBay for a good used nailer/stapler.
The cheapest 18g combo nailer I could find online is below, at $56 or so:
www.messerhardware.com/CHN10499_18G_NAIL...TAPLER_p/7344401.htm
Other good options are the Ridgid and Husky nailers, as they're relatively inexpensive yet better than the Central Pneumatic tools.
- MTR
The cheapest 18g combo nailer I could find online is below, at $56 or so:
www.messerhardware.com/CHN10499_18G_NAIL...TAPLER_p/7344401.htm
Other good options are the Ridgid and Husky nailers, as they're relatively inexpensive yet better than the Central Pneumatic tools.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.043 seconds