Need help identifying a new pump for old Generac Pressure Washer

4 months 1 week ago #2460 by reaboy86

hello,

I have a Generac 2700 psi 2.5gpm model 1043-2. I have put seals in this pump numerous times and it is quite expensive. I would like to just replace the pump but can't seem to find one this style.

It has a tapered crankshaft with a keyway (keyway not used). There is a steel hex tapered sleeve that tightens down the swash plate. The bolt face to attach to the engine block is square with 2 9/16" bolt spacing on each edge (not the diagonal measure).

Any help would be appreciated

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.097 seconds