- Posts: 6
- Thank you received: 0
Powerhorse Pressure Washer starts for 5 seconds then dies
- DIYhelpneeded
- Topic Author
- Offline
- Fresh Boarder
Less
More
5 years 3 months ago #3183
by DIYhelpneeded
Replied by DIYhelpneeded on topic Powerhorse Pressure Washer starts for 5 seconds then dies
No, it does not. Recoil starter pulls as normal. Don't think the pump is the culprit.
Please Log in or Create an account to join the conversation.
- DIYhelpneeded
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 6
- Thank you received: 0
5 years 3 months ago #3184
by DIYhelpneeded
Replied by DIYhelpneeded on topic Powerhorse Pressure Washer starts for 5 seconds then dies
After multiple attempts to start this SOB with the choke fully closed and then in various positions, I pulled the plug and its dry indicating maybe it is isn't getting gas but I'm bafffled. The carb is new and when I pull the carb drain plug and leave the gas on, it flows out of the bowl so there's no gas obstruction to the carb. The plug looked dry going through the same attempt at starting with the original carb in place.
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
5 years 3 months ago #3185
by MTR-Admin
Replied by MTR-Admin on topic Powerhorse Pressure Washer starts for 5 seconds then dies
Not being there, it's hard to tell.
There are only 3 things that can be the culprit in a gas engine:
-Gas
-Spark
-Compression
There are only 3 things that can be the culprit in a gas engine:
-Gas
-Spark
-Compression
Please Log in or Create an account to join the conversation.
- DIYhelpneeded
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 6
- Thank you received: 0
5 years 3 months ago #3186
by DIYhelpneeded
Replied by DIYhelpneeded on topic Powerhorse Pressure Washer starts for 5 seconds then dies
I appreciate your time an help. I've been a DIY person all my life (I'm 71) and this little bastard has me stumped. Guess I'll bite the bullet and take it to a small engine repair shop. Again, thanks for your help.
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.055 seconds