Dewalt DW514 hammer drill. Repair or replace

8 years 2 months ago #1862 by billkater
Dewalt DW514 hammer drill. Repair or replace was created by billkater
My hammer drill got to where I would have to spin it to get it to take off. Made me think it was the brushes. I took it apart and found a bad spot in the armature. See picture.

Repair or replace?





Attachments:

Please Log in or Create an account to join the conversation.

8 years 2 months ago #1865 by MTR-Admin
Replied by MTR-Admin on topic Dewalt DW514 hammer drill. Repair or replace
Thanks for the post!

Unfortunately, that Armature is past the point of no return as that gap is much too large to be repairable.

This is an older model and I know that DeWalt has discontinued the Armature, so it can't be replaced either. Bad news on this one I'm afraid.

- MTR
The following user(s) said Thank You: billkater

Please Log in or Create an account to join the conversation.

8 years 2 months ago #1867 by billkater
Replied by billkater on topic Dewalt DW514 hammer drill. Repair or replace
Guess it time for a new one. I ordered the D25263K.

Thanks

Please Log in or Create an account to join the conversation.

5 years 8 months ago #2975 by Dgi.816
Replied by Dgi.816 on topic Dewalt DW514 hammer drill. Repair or replace
Hello Bill
Hope your new drill is working out great for you.

Do you happen to have the old one still around?

Mine just broke, the hammer bearing area, i am wondering if you still have it arround and if you are willing to selling it.

Thanks and have a blessed day
Dan from Michigan

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.083 seconds