- Posts: 1
- Karma: 1
- Thank you received: 0
MAKITA BHP452 CORDLESS DRILL
- smokeysailor
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
8 years 8 months ago #1530
by smokeysailor
MAKITA BHP452 CORDLESS DRILL was created by smokeysailor
Putting my drill back together and no matter what I do the outside cover won't fix back tight.
Ive heard everything has to be just in the right place and I think it is but it must not be.
Help please!
Ive heard everything has to be just in the right place and I think it is but it must not be.
Help please!
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
8 years 8 months ago #1535
by MTR-Admin
Replied by MTR-Admin on topic MAKITA BHP452 CORDLESS DRILL
Thanks for the post!
That's right, all of the wiring and components must be reinstalled nice 'n tight in the casing or else the halves will never fit together flush.
Most likely it's a rogue wire in the way that's causing it, if not then I would simply remove all of the components and reinstall. Also, make sure both of the plastic Housings aren't damaged in any way, so as to not allow the components to fit inside as they should.
- MTR
That's right, all of the wiring and components must be reinstalled nice 'n tight in the casing or else the halves will never fit together flush.
Most likely it's a rogue wire in the way that's causing it, if not then I would simply remove all of the components and reinstall. Also, make sure both of the plastic Housings aren't damaged in any way, so as to not allow the components to fit inside as they should.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.048 seconds