- Posts: 1
- Karma: 1
- Thank you received: 0
Rn45b
- jwhodson@gmail.com
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
8 years 3 months ago #1815
by jwhodson@gmail.com
Rn45b was created by jwhodson@gmail.com
I have An rn45B ridge runner roofing gun and I replace the trigger valve assembly and The gun will not fire now. I Replacing the valve fixed a leak that I had.
The gun will fire if I manually press the trigger valve post even if the nose guard is not depressed. Do you have any ideas on what could cause this??
The gun will fire if I manually press the trigger valve post even if the nose guard is not depressed. Do you have any ideas on what could cause this??
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
8 years 3 months ago #1816
by MTR-Admin
Replied by MTR-Admin on topic Rn45b
Thanks for the post!
I have to say this first, the trigger may not be assembled correctly. It sounds as if the safety is not engaging the trigger tab so that the trigger valve will be depressed when the trigger is pulled.
Check the trigger and make sure the tab is up and is making contact when nose piece is depressed.
Let me know what you find and we'll go from there.
- MTR
I have to say this first, the trigger may not be assembled correctly. It sounds as if the safety is not engaging the trigger tab so that the trigger valve will be depressed when the trigger is pulled.
Check the trigger and make sure the tab is up and is making contact when nose piece is depressed.
Let me know what you find and we'll go from there.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.044 seconds