- Posts: 11
- Thank you received: 0
Questions about air crown staples
- Speedaire1
- Topic Author
- Offline
- Fresh Boarder
Less
More
4 years 4 months ago #3456
by Speedaire1
Questions about air crown staples was created by Speedaire1
I would like to buy a cheap (HF) 1/4 " crown stapler since it will be used very seldom.
My question is: will any brand of staples fit as long as it is designated 1/4 " crown staples with the correct gauge?
I know they come in different gauges and lengths
My question is: will any brand of staples fit as long as it is designated 1/4 " crown staples with the correct gauge?
I know they come in different gauges and lengths
Please Log in or Create an account to join the conversation.
- harleydude
- Offline
- Junior Boarder
Less
More
- Posts: 35
- Thank you received: 5
4 years 4 months ago - 4 years 4 months ago #3457
by harleydude
Tools make life easier...
Replied by harleydude on topic Questions about air crown staples
Any brand of staples will work as long as they are 1/4" crown with the same gauge as the nailer, most of them being 18 ga.
Check the depth capacity of the tool to be sure that it will suffice for your job.
Check the depth capacity of the tool to be sure that it will suffice for your job.
Tools make life easier...
Last edit: 4 years 4 months ago by harleydude.
The following user(s) said Thank You: Speedaire1
Please Log in or Create an account to join the conversation.
- Speedaire1
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 11
- Thank you received: 0
4 years 4 months ago #3458
by Speedaire1
Replied by Speedaire1 on topic Questions about air crown staples
Thanks I was almost sure that would be the case
I just didn't want to buy one and be committed to their staples
I just didn't want to buy one and be committed to their staples
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.076 seconds