- Posts: 1
- Thank you received: 0
Rigid OF45150B tank leak
- Inspector4
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
7 years 3 months ago #1991
by Inspector4
Rigid OF45150B tank leak was created by Inspector4
Looking for a less expensive replacement tank. Will any other tanks work on this compressor?
Looks like the CH WL 506208 is awfully close.
Looks like the CH WL 506208 is awfully close.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
7 years 3 months ago #1992
by MTR-Admin
Replied by MTR-Admin on topic Rigid OF45150B tank leak
Thanks for the post!
The tank for the WL506208 unit (part# 045800CG) is still around the $200 range, so an OEM tank or even a generic tank will be pretty expensive, honestly. The best course of action is to find a used tank/frame assembly or replace the whole unit. Tanks can't be welded when a leak occurs, at least not effectively.
You can always call Campbell Hausfeld directly at 800-543-6400 and ask if they may have any used or returned tanks available for this model (as they made it for Ridgid).
If you go the generic tank route, there would obviously be modifications required. But again, I would contact a manufacturer rep and see what they can recommend you.
- MTR
The tank for the WL506208 unit (part# 045800CG) is still around the $200 range, so an OEM tank or even a generic tank will be pretty expensive, honestly. The best course of action is to find a used tank/frame assembly or replace the whole unit. Tanks can't be welded when a leak occurs, at least not effectively.
You can always call Campbell Hausfeld directly at 800-543-6400 and ask if they may have any used or returned tanks available for this model (as they made it for Ridgid).
If you go the generic tank route, there would obviously be modifications required. But again, I would contact a manufacturer rep and see what they can recommend you.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.099 seconds