- Posts: 1
- Karma: 1
- Thank you received: 0
Old craftsman 2 hp air compressor
- TLH
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 7 months ago #976
by TLH
Old craftsman 2 hp air compressor was created by TLH
I have Craftsman 2 hp Modle 919.176120 it is missing the motor and of the drive pulley. Pulley # is C-PU-2872 What I really neen is does any one know what the required RPM is for that modle compressor or the motor drive pulley and motor RPM
Ted
Ted
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 7 months ago #978
by MTR-Admin
Replied by MTR-Admin on topic Old craftsman 2 hp air compressor
Thanks for the post!
Well, the Flywheel is 10" in diameter and the OEM motor Pulley has an O.D. of 1.95".
The original motor has an RPM of 3,450 so that would put the Pump RPM at roughly 672 to 690.
You could certainly increase the pulley diameter a bit to say, a maximum of 2.75" to get a faster RPM at the pump (about 950 with a 2.75" motor pulley).
But, the faster the pump RPM, the more wear you'll see and longevity suffers.
Hope this helps!
- MTR
Well, the Flywheel is 10" in diameter and the OEM motor Pulley has an O.D. of 1.95".
The original motor has an RPM of 3,450 so that would put the Pump RPM at roughly 672 to 690.
You could certainly increase the pulley diameter a bit to say, a maximum of 2.75" to get a faster RPM at the pump (about 950 with a 2.75" motor pulley).
But, the faster the pump RPM, the more wear you'll see and longevity suffers.
Hope this helps!
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.048 seconds