- Posts: 1
- Karma: 1
- Thank you received: 0
Removing Shroud from Kobalt Air Compressor
- dlanderson
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 11 months ago #842
by dlanderson
Removing Shroud from Kobalt Air Compressor was created by dlanderson
I have a Kobalt Air Compressor, model 99007, 1.5 HP, 26 gal capacity, 115 VAC. I want to remove the shroud so I can repair either the motor or the pump. I have removed the six star head bolts which hold the top half of the shroud to the lower half, but I can not remove the top shroud for some reason. According to the parts diagram, those are the only bolts. Am I missing something here. HELP!
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 11 months ago #843
by MTR-Admin
Replied by MTR-Admin on topic Removing Shroud from Kobalt Air Compressor
Thanks for the post!
That's odd, as far as I know those 6 screws are the only fasteners holding the shroud cover on. I would honestly contact Coleman Powermate directly at 888-895-4549. Coleman actually manufactured this unit for Kobalt (which is Lowe's "house brand").
I'm sure a technical rep can assist you further. Once you find out feel free to post the answer here for others!
- MTR
That's odd, as far as I know those 6 screws are the only fasteners holding the shroud cover on. I would honestly contact Coleman Powermate directly at 888-895-4549. Coleman actually manufactured this unit for Kobalt (which is Lowe's "house brand").
I'm sure a technical rep can assist you further. Once you find out feel free to post the answer here for others!
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.050 seconds