Sanborn 89CB200-22 trips breaker immediately

11 years 9 months ago - 11 years 9 months ago #133 by wrhjr3
Sanborn 89CB200-22 trips breaker immediately was created by wrhjr3
I can find absolutely nothing on the Internet about this compressor. A Google search of the model number comes up empty. It trips the breaker immediately. I suspect the start capacitor but need to insure it's the right one. Help!

Sorry - I put this in the wrong category and don't know how to delete it.

Please Log in or Create an account to join the conversation.

10 years 11 months ago #236 by MTR-Admin
Replied by MTR-Admin on topic Sanborn 89CB200-22 trips breaker immediately
Right, this is an old compressor model so there's not much info for it at all. It COULD be a capacitor issue, but could also be an Unloader Valve problem. Is the unit bleeding the excess air pressure off of the head when it shuts off? Typically you would hear a burst of air for a few second after the unit shuts off, this is the Unloader Valve on the pressure switch which is bleeding off the excess head pressure. If not, then the Unloader Valve is defective.

If the Unloader Valve is working properly, I would test your capacitors, first. You can find a helpful video on how to test the capacitors on our site at this page link:
www.mastertoolrepair.com/images/How%20To...%20a%20Capacitor.pdf

This is a good place to start, certainly.

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.044 seconds