emglo ku compressor pump

11 years 9 months ago #127 by rick
emglo ku compressor pump was created by rick
Does anyone know where to buy a k-40 head asembly for a emglo ku pump

Please Log in or Create an account to join the conversation.

11 years 9 months ago #128 by MTR-Admin
Replied by MTR-Admin on topic emglo ku compressor pump
We do have this Head Assy available Rick, the part# has just changed (since Jenny, Inc bought the company a few years back).

Now it's part# 310-1008 and it sells for about $105.02 + shipping.

NOTE: This is the Head WITH Unloader Valves, complete.

Thanks for the inquiry!
- MTR

Please Log in or Create an account to join the conversation.

11 years 9 months ago #129 by rick
Replied by rick on topic emglo ku compressor pump
Is this the valve plate complete and the head with the unloader valves.My pump is old will I need the new style air filter

Please Log in or Create an account to join the conversation.

11 years 9 months ago #130 by rick
Replied by rick on topic emglo ku compressor pump
I think I asked for the wrong part I need the valve plate assembly. I need to know if you have it for the ku pump and weill my head work with the one for the jenny?

Please Log in or Create an account to join the conversation.

11 years 9 months ago #131 by rick
Replied by rick on topic emglo ku compressor pump
can i buy just the valva plate assembly for the ku pump and use my head? and the two gaskets

Please Log in or Create an account to join the conversation.

11 years 9 months ago #132 by MTR-Admin
Replied by MTR-Admin on topic emglo ku compressor pump
You certainly can replace just the Valve Plate Assy, it's the Valve Plate WITH all Valves included as well as the two Head Gaskets.

This part# would be "L140assby" which sells for around $78 + shipping. This will work with any KU pump you have as they never changed the Valve Plate design over the years.

If you want to just replace the Unloader Valves in the Head as well (not the Head itself) you would order part# 610-1042 at around $8.62 EACH.

Thanks!
- MTR
The following user(s) said Thank You: rick

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.059 seconds