- Posts: 1
- Karma: 1
- Thank you received: 0
RamAir Compressors
- Brad
- Topic Author
- Offline
- Fresh Boarder
Less
More
10 years 6 months ago #452
by Brad
RamAir Compressors was created by Brad
Does anyone have any knowledge of the RamAir brand compressors? I have not been able to find much info on them. Just wondering if parts can be found to repair them. I found a really clean, rarely used 80 Gal 5HP 230V single phase for $400.
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
10 years 6 months ago #456
by MTR-Admin
Replied by MTR-Admin on topic RamAir Compressors
No eBay APP ID défined in Kunena configurationI'm not very familiar with the brand, but RamAir comes up every now and then from customer requests for parts.
As far as I know it's a private label manufactured by various manufacturers.
Here's a link to an 80g, 5HP Two-Stage RamAir compressor on eBay:
If this is similar to the unit you're looking for then I would say it's a solid buy, certainly. This unit in particular is manufactured by Campbell Hausfeld and has quite some age on it. It has a heavy-duty cast-iron pump, however, that was a very popular Campbell pump and they still manufacture a similar pump today.
If the pump runs well (and you don't hear an knocking of course!) and the tank holds air then I would say it's a good purchase!
- MTR
As far as I know it's a private label manufactured by various manufacturers.
Here's a link to an 80g, 5HP Two-Stage RamAir compressor on eBay:
If this is similar to the unit you're looking for then I would say it's a solid buy, certainly. This unit in particular is manufactured by Campbell Hausfeld and has quite some age on it. It has a heavy-duty cast-iron pump, however, that was a very popular Campbell pump and they still manufacture a similar pump today.
If the pump runs well (and you don't hear an knocking of course!) and the tank holds air then I would say it's a good purchase!
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.044 seconds