- Posts: 2
- Thank you received: 0
Air Compressor model # 947265
- jerrylaplaza
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
10 years 7 months ago #434
by jerrylaplaza
Air Compressor model # 947265 was created by jerrylaplaza
I have a model # 947265 air compressor that is almost new and is now leaking out of the small hole in the cap screw that is located at the end of the finned alum 3/8 outlet tube that goes in the compressor. The air blows out the small hole all the time. The outlet tube is listed as part # A00048. Can i just plug the hole?
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
10 years 6 months ago #444
by MTR-Admin
Replied by MTR-Admin on topic Air Compressor model # 947265
Jerry,
I just saw this post, so I am sorry for the delay.
Can you take a picture of the part that you say is leaking and attach it to your reply?
Before I say to go ahead and plug the hole, I want to make sure of which part is leaking.
I looked at the schematic, but wasn't quite sure of which cap screw you are speaking of.
- MTR
I just saw this post, so I am sorry for the delay.
Can you take a picture of the part that you say is leaking and attach it to your reply?
Before I say to go ahead and plug the hole, I want to make sure of which part is leaking.
I looked at the schematic, but wasn't quite sure of which cap screw you are speaking of.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.042 seconds