- Posts: 1
- Karma: 1
- Thank you received: 0
Emglo AM78 1.5 hp hand carry double tank unit
- lanede
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
10 years 7 months ago #411
by lanede
Emglo AM78 1.5 hp hand carry double tank unit was created by lanede
I need to replace a crankcase, and am interested in procedure to remove crankshaft from the unit so I can remove old crankcase and install new one. I am unsure how to remove the rotor from the crankcase which needs to be done before I can remove the crankshaft from the bearing on the crankcase. Will a bearing splitter remove it or does the rotor need to be heated prior to removing with a splitter or some other method? Thanks.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
10 years 7 months ago #414
by MTR-Admin
Replied by MTR-Admin on topic Emglo AM78 1.5 hp hand carry double tank unit
Thanks for the post!
All of the parts on this pump/motor assy are simply pressed together. To remove or disassemble the parts I would take a small torch and heat it up; this will make disassembling the rotor/crank much easier. You can just use bearing pullers as well (the standard, 3-prong type).
I hope this helps, please reply if you need any additional info.
- MTR
All of the parts on this pump/motor assy are simply pressed together. To remove or disassemble the parts I would take a small torch and heat it up; this will make disassembling the rotor/crank much easier. You can just use bearing pullers as well (the standard, 3-prong type).
I hope this helps, please reply if you need any additional info.
- MTR
The following user(s) said Thank You: lanede
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.046 seconds