- Posts: 2
- Karma: 2
- Thank you received: 0
Air compressor
- bradford9007
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
5 years 7 months ago #2600
by bradford9007
Air compressor was created by bradford9007
I have the bostich cap60p-of 6 gal pancake model. It will not build pressure past 60#. I looked at the head plate assembly and didn’t see any damage. I also looked at the piston ring and it didn’t have cracks or dry rot!
Any ideas!
Any ideas!
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
5 years 7 months ago #2602
by MTR-Admin
Replied by MTR-Admin on topic Air compressor
Thanks for the post Bradford9007!
I can almost guarantee you'll need to replace the reed valves. This is almost always the case when the unit won't build past 60 PSI; we sell a lot of valve plate assemblies.
They've changed the design of this Valve System to a two-piece valve plate with valves sandwiched in between. It's a whole new kit that includes a new Head, Valve Plate w/ Valves, Gaskets, Piston Top and Air Filter (part# is DE-2752222 at $24.95 + shipping).
You can view this on our website by clicking on the below link:
mastertoolrepair.com/air-compressor-pump...-ol195-p-746902.html
If your piston ring isn't damaged, I'd replace the above.
- MTR
I can almost guarantee you'll need to replace the reed valves. This is almost always the case when the unit won't build past 60 PSI; we sell a lot of valve plate assemblies.
They've changed the design of this Valve System to a two-piece valve plate with valves sandwiched in between. It's a whole new kit that includes a new Head, Valve Plate w/ Valves, Gaskets, Piston Top and Air Filter (part# is DE-2752222 at $24.95 + shipping).
You can view this on our website by clicking on the below link:
mastertoolrepair.com/air-compressor-pump...-ol195-p-746902.html
If your piston ring isn't damaged, I'd replace the above.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.077 seconds