- Posts: 1
- Karma: 1
- Thank you received: 0
sanborn air compressor
- willie
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
8 years 5 months ago #1720
by willie
sanborn air compressor was created by willie
I have a sanborn 84A100-22 air compessor. The manifold has D83 stamped near the bottom of the unit. There is an open 3/8" unthreaded hole into the manifold under the threaded port where the hose connector attaches. What is missing here? Thanks, Willie.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
8 years 5 months ago #1721
by MTR-Admin
Replied by MTR-Admin on topic sanborn air compressor
Thanks for the post!
You can view a full parts diagram for this model by clicking on the below link:
www.mastertoolrepair.com/portable-single...00a30h-p-747335.html
The manifold oulets are for the Tank Pressure Gauge, Regulated Pressure Gauge, Regulator, Safety Valve and lastly, for a coupler to attach your air hose to.
Hopefully this helps. If you have any other questions at all feel free to reply.
- MTR
You can view a full parts diagram for this model by clicking on the below link:
www.mastertoolrepair.com/portable-single...00a30h-p-747335.html
The manifold oulets are for the Tank Pressure Gauge, Regulated Pressure Gauge, Regulator, Safety Valve and lastly, for a coupler to attach your air hose to.
Hopefully this helps. If you have any other questions at all feel free to reply.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.065 seconds