Newbie mistake?

8 years 6 months ago #1633 by Danev6972
Newbie mistake? was created by Danev6972
Hello all. I decided to stop by at a consignment shop & ended up taking home a used air comp for $133 tax included.upon closer inspection & some reasearch at home, the motor was not the original. The tank is pro air (devilbiss) prfb5520vp-wk (20 gal)& the motor is a campbell hausfeld wl504307aj 4.3@40 psi 3.1@90 psi 125psi max.the motor was from a 4gal tank.
What are some implications with this configuration?
Dont know if i paid too much for this.
Any input is highly appreciated.

Please Log in or Create an account to join the conversation.

8 years 6 months ago #1634 by MTR-Admin
Replied by MTR-Admin on topic Newbie mistake?
Thanks for the post!

By the way, you can find a breakdown with parts list for this unit on our site by clicking the below link:

www.mastertoolrepair.com/air-compressor-...0vp-wk-p-288669.html

As long as the Piston Ring and Valves are in good shape in the pump, and the tank holds air, I'd say $133 is a decent price.

The wl504307aj uses a similar direct-drive, oil-free motor/pump assembly so I'd wager it puts out a very similar CFM spec as well. I'll see if I can get some additional information for the original pump/motor assy that was installed on the DeVilbiss unit.

- MTR

Please Log in or Create an account to join the conversation.

8 years 6 months ago #1636 by Danev6972
Replied by Danev6972 on topic Newbie mistake?
Thanks MTR. All i know about compressors is that a cast iron motor is best. Any input/advice from the pros is much appreciated.

Please Log in or Create an account to join the conversation.

8 years 6 months ago #1638 by MTR-Admin
Replied by MTR-Admin on topic Newbie mistake?
Glad to help, feel free to reply with any additional questions.

- MTR

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.066 seconds