Help with pump id

8 years 8 months ago #1505 by john69camaro
Help with pump id was created by john69camaro
Hi. Like most people here i like to fix and give new life to old tools. Not to long ago i bought a couple of pumps that have no tag on them, except a stamping on the side T40 and i would like to know what kind of pumps are and all the specs. Thank you
Attachments:

Please Log in or Create an account to join the conversation.

8 years 8 months ago #1509 by MTR-Admin
Replied by MTR-Admin on topic Help with pump id
Thanks for the post John.

The pump on the left is an ABAC/IMC pump and the model is "HP50".

You can view a full parts breakdown for this with a parts list (and see specs in the tabs at the top of the page) by clicking on the below link:

www.mastertoolrepair.com/air-compressor-...ts-hp50-p-16192.html

As for the pump to the right....good question. I'm not sure at the moment, although I'll try to dig a little further to see what I can find.

- MTR

Please Log in or Create an account to join the conversation.

8 years 8 months ago #1514 by john69camaro
Replied by john69camaro on topic Help with pump id
They seem to be the same size pumps, the only part that is not same is the head assembly.

Please Log in or Create an account to join the conversation.

8 years 8 months ago #1515 by MTR-Admin
Replied by MTR-Admin on topic Help with pump id
John,

I would bet the specs are nearly identical on these pumps, as they do look very similar in size, the heads are just a bit different.

Below are the specs for the HP50 pump and I'd say the pump on the right will have very similar specs:

37 CFM @ 100 PSI
7.5 - 10.0 HP
Min RPM 700 Max RPM 1000
Max Pressure 175 PSI
19.70" flywheel.
Bore LP 5.12
Bore HP 2.76
Stroke 3.74
Belt B-2
Weight 187 lbs.
19.7 L x 16.23 W x 28.00 H
Bolt Footprint 11.42" Side to Side; 9.06" Front to Back
72.64 oz. oil capacity

- MTR

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.053 seconds