no air press

9 years 5 months ago #1037 by pauld
no air press was created by pauld
hey , I just replace the release value in my speedaire 4lw38. It is sucking in air not building up? Any suggestion would help. Thanks pauld

Please Log in or Create an account to join the conversation.

9 years 5 months ago #1039 by MTR-Admin
Replied by MTR-Admin on topic no air press
Thanks for the post!

Which Safety Relief Valve keeps popping off? Is it the main Safety Valve in threaded in the tank, or the Safety Valve threaded into the fitting on the pump head?

BTW you can see a full parts breakdown with parts list of this model on our site by clicking on the below link:

www.mastertoolrepair.com/air-compressor-...8-13h30-p-52580.html

If the Safety Valve on the pump head keeps blowing off then you probably have a blown head Gasket or damaged Valves in the pump, which is common.

- MTR

Please Log in or Create an account to join the conversation.

9 years 5 months ago #1041 by pauld
Replied by pauld on topic no air press
Thanks MTR, I am going to rebuild the head with new gaskets and check rings when I take it apart. After digging around I think it is the head gasket or valve gasket inside the head. I will let you know what I find.

Please Log in or Create an account to join the conversation.

9 years 5 months ago #1051 by rappy144
Replied by rappy144 on topic no air press
put om new air pop offs

Please Log in or Create an account to join the conversation.

9 years 5 months ago #1052 by pauld
Replied by pauld on topic no air press
it was the valve plate. I have a new one coming. Thanks

Please Log in or Create an account to join the conversation.

9 years 5 months ago #1054 by MTR-Admin
Replied by MTR-Admin on topic no air press
Glad to hear you found the problem! That should take care of it I'm sure.

- MTR
The following user(s) said Thank You: pauld

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.057 seconds