- Posts: 1
- Karma: 1
- Thank you received: 0
old sanborn electric compressor regulator
- mikey21542
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 9 months ago #887
by mikey21542
old sanborn electric compressor regulator was created by mikey21542
Hi, I was recently given an old 120 psi sanborn. The only reason he gave it to me was because he couldn't find a new regulator for it. It's a big plastic screw on piece with a screw and bolt type adjuster with a plastic cap. Has a spring inside. The model number is 89B200-22. I'm not sure of it'll help but the serial is G02420366. If anyone can help or know where I can get a part, it'd be greatly appreciated.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 9 months ago #893
by MTR-Admin
Replied by MTR-Admin on topic old sanborn electric compressor regulator
Thanks for the post!
You should have the old "Square Knob" type of regulator on this unit. This is actually still available in a regulator rebuild kit that we have available; it includes the Knob Assy, Spring and Internal Repair Kit.
You can see a photo and description of the part on our website by clicking on the below link:
www.mastertoolrepair.com/sanborn-regulat...areovhkit-p-150.html
I hope this helps, feel free to reply with any additional questions you may have.
- MTR
You should have the old "Square Knob" type of regulator on this unit. This is actually still available in a regulator rebuild kit that we have available; it includes the Knob Assy, Spring and Internal Repair Kit.
You can see a photo and description of the part on our website by clicking on the below link:
www.mastertoolrepair.com/sanborn-regulat...areovhkit-p-150.html
I hope this helps, feel free to reply with any additional questions you may have.
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.043 seconds