- Posts: 2
- Karma: 2
- Thank you received: 0
Electric Motor pulley
- patjuv
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
9 years 11 months ago #832
by patjuv
Electric Motor pulley was created by patjuv
I am using an old SPEEDAIRE compressor 3Z406D and refixing it now.
Electric motor is a : DAYTON 6K779E, Volt 230 - Hz 60 - PH1 - HP3 - RPM 3450 - Amps 16.0 - FR L56
QUESTIONS:
1- What are the pulley size on the Electric Motor to use with a Motor Pump VT4723
2- What are the Pulley size on the Electric Motor to use with a Speedaire Motor Pump 2Z499A
What will be the smalest and the biggest pulley to be abble to use.
Thank you very much MTR
Pat.
Electric motor is a : DAYTON 6K779E, Volt 230 - Hz 60 - PH1 - HP3 - RPM 3450 - Amps 16.0 - FR L56
QUESTIONS:
1- What are the pulley size on the Electric Motor to use with a Motor Pump VT4723
2- What are the Pulley size on the Electric Motor to use with a Speedaire Motor Pump 2Z499A
What will be the smalest and the biggest pulley to be abble to use.
Thank you very much MTR
Pat.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 11 months ago #838
by MTR-Admin
Replied by MTR-Admin on topic Electric Motor pulley
Thanks for the post! I've attached the .pdf parts breakdown and parts list for this unit, hopefully this helps.
The pulley listed for the unit is a "PU000100AG" part# which was 1.7" O.D. x 5/8" shaft.
The VT4723 and the 2Z499A are basically the same pump.
The VT4723 has a flywheel that has a v-section belt and the current pump(2Z499) has poly-V, grooved flywheel.
The old flywheel will work on the new pump(VT472200AJ)(which is the VT4723 Pump without the flywheel).
I hope this answers the question.
- MTR
The pulley listed for the unit is a "PU000100AG" part# which was 1.7" O.D. x 5/8" shaft.
The VT4723 and the 2Z499A are basically the same pump.
The VT4723 has a flywheel that has a v-section belt and the current pump(2Z499) has poly-V, grooved flywheel.
The old flywheel will work on the new pump(VT472200AJ)(which is the VT4723 Pump without the flywheel).
I hope this answers the question.
- MTR
Please Log in or Create an account to join the conversation.
- patjuv
- Topic Author
- Offline
- Fresh Boarder
-
Less
More
- Posts: 2
- Karma: 2
- Thank you received: 0
9 years 11 months ago #846
by patjuv
Replied by patjuv on topic Electric Motor pulley
Thank you very much for your information.
One more thing:
I want to increase the pump speed to fill quicker the tank.
- what will be the biggest motor pulley size i can use without any damage to the pump?
I am using now the 1,7" pulley on elctric motor, and i am inspecting to go to 2" - 2,5" or 2,8" pulley
Thank you
Pat.
One more thing:
I want to increase the pump speed to fill quicker the tank.
- what will be the biggest motor pulley size i can use without any damage to the pump?
I am using now the 1,7" pulley on elctric motor, and i am inspecting to go to 2" - 2,5" or 2,8" pulley
Thank you
Pat.
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
9 years 11 months ago #847
by MTR-Admin
Replied by MTR-Admin on topic Electric Motor pulley
I asked the manufacturer rep and they stated:
"We have this pump listed as 550-670 RPM’s. The 1.7" is the pulley we used to run this pump at max RPMs".
- MTR
"We have this pump listed as 550-670 RPM’s. The 1.7" is the pulley we used to run this pump at max RPMs".
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.049 seconds