- Posts: 2
- Thank you received: 0
Central Pneumatic 67696 / Husky H1506F
- BigDaddy
- Topic Author
- Offline
- Fresh Boarder
Less
More
4 years 9 months ago #3432
by BigDaddy
Central Pneumatic 67696 / Husky H1506F was created by BigDaddy
Does anyone know if parts for these are interchangeable. In particular the valve plate assy.
I have two Central Pneumatic 67696 1.5HP 6 Gallon pancake compressors and one recently stopped completely filling. It's stops around 60-70psi. After investigating I found that the aluminum valve plate gasket was damaged. Unfortunately you can't get a replacement from Harbor Freight. They look identical and thought I would ask. Worst case I will be out $15 after shipping if they don't.
I have two Central Pneumatic 67696 1.5HP 6 Gallon pancake compressors and one recently stopped completely filling. It's stops around 60-70psi. After investigating I found that the aluminum valve plate gasket was damaged. Unfortunately you can't get a replacement from Harbor Freight. They look identical and thought I would ask. Worst case I will be out $15 after shipping if they don't.
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
4 years 9 months ago #3444
by MTR-Admin
Replied by MTR-Admin on topic Central Pneumatic 67696 / Husky H1506F
These units may very well use the same exact valve plate. I can't confirm for 100% certainty, but that Harbor Freight unit does look identical to the H1506F.
First, you need to confirm if you have a "type 1" or "type 2" model. Click on the below links to view the different valve plates on the two types:
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747266.html
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747265.html
Does your valve plate have a 3-fingered valve on top? If so, you have the "type 1" unit. Or, does it have a two-piece valves plate with rectangular valves sandwiched in between? This would be the "type 2" unit.
- MTR
First, you need to confirm if you have a "type 1" or "type 2" model. Click on the below links to view the different valve plates on the two types:
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747266.html
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747265.html
Does your valve plate have a 3-fingered valve on top? If so, you have the "type 1" unit. Or, does it have a two-piece valves plate with rectangular valves sandwiched in between? This would be the "type 2" unit.
- MTR
Please Log in or Create an account to join the conversation.
- BigDaddy
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 2
- Thank you received: 0
4 years 9 months ago #3445
by BigDaddy
Replied by BigDaddy on topic Central Pneumatic 67696 / Husky H1506F
Definitely Type 2
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
4 years 9 months ago #3446
by MTR-Admin
Replied by MTR-Admin on topic Central Pneumatic 67696 / Husky H1506F
In that case, I would say there is a high likelihood that this Husky H1506F type 2 model is identical. It's worth a shot, anyway.
Just use the schematic diagram and parts list on this page:
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747266.html
- MTR
Just use the schematic diagram and parts list on this page:
mastertoolrepair.com/portable-oilfree-ai...h1506f-p-747266.html
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.056 seconds