Drain valve

5 years 11 months ago - 5 years 11 months ago #2846 by goalie5hole
Drain valve was created by goalie5hole
I have an Emglo AM78-HC4V compressor. I need the drain valve that's located under the top tank, would it be 31A or 31B??

Please Log in or Create an account to join the conversation.

5 years 11 months ago #2847 by skatingtoolman
Replied by skatingtoolman on topic Drain valve
This is the part you need here. I would buy two, one for the top and one for the bottom.
mastertoolrepair.com/drain-valve-du25-100-p-1026.html
The following user(s) said Thank You: goalie5hole

Please Log in or Create an account to join the conversation.

5 years 11 months ago - 5 years 11 months ago #2880 by goalie5hole
Replied by goalie5hole on topic Drain valve
You were wrong. That valve is way too big. The valve that is currently in the compressor is T shaped

Please Log in or Create an account to join the conversation.

5 years 11 months ago #2881 by MTR-Admin
Replied by MTR-Admin on topic Drain valve
If you have a really old unit, they used the 1/8" M NPT drain valve which would be this one:
mastertoolrepair.com/drain-cock-133-p-891.html

You must have an early serial number. They went away from 1/8" drain valves shortly after making these.

Please Log in or Create an account to join the conversation.

5 years 11 months ago - 5 years 11 months ago #2882 by goalie5hole
Replied by goalie5hole on topic Drain valve
How do I return the ones that are no good to me now?? Since skatingtoolman read the model number wrong. He recommended the valve for AM780-HC4V which I do NOT have

Please Log in or Create an account to join the conversation.

5 years 11 months ago #2883 by MTR-Admin
Replied by MTR-Admin on topic Drain valve
We will send out the correct ones at no charge.
Keep the ones that you have. You may need them for another unit one day.
The following user(s) said Thank You: goalie5hole

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.068 seconds