skilsaw 367 type 1

6 years 9 months ago #2299 by mailman57
skilsaw 367 type 1 was created by mailman57
I bought an old SKILSAW 367 type1 for $15.00. I changed the oil, repaired the cord, and replaced the brushes with a pair I had to modify to fit. Problem now is a guard return spring that has come loose. Is there a trick to getting the spring ends set in corresponding holes?

Please Log in or Create an account to join the conversation.

6 years 9 months ago #2301 by MTR-Admin
Replied by MTR-Admin on topic skilsaw 367 type 1
Thanks for the post mailman57,

I don't know of a trick per se, it's just a matter of taking some long needle nose pliers and carefully inserting the hook on each end of the spring and inserting it into the corresponding holes. It can be tedious but it's the only method I know.
Hopefully someone who does have a trick can chime in!

- MTR

Please Log in or Create an account to join the conversation.

6 years 9 months ago #2302 by mailman57
Replied by mailman57 on topic skilsaw 367 type 1
I appreciate the reply. The SKIL help desk wasn't much help. I'm guessing once I get the spring ends set, I'll need to wind the guard to achieve proper tension.

Please Log in or Create an account to join the conversation.

6 years 9 months ago #2303 by MTR-Admin
Replied by MTR-Admin on topic skilsaw 367 type 1
Here's a YouTube video I found, I think this may assist you:



- MTR

Please Log in or Create an account to join the conversation.

6 years 3 months ago #2479 by spob820
Replied by spob820 on topic skilsaw 367 type 1
Is it the metal handle version, or the plastic handle? Are you saying that it has the return spring around the arbor?

Please Log in or Create an account to join the conversation.

6 years 3 months ago #2489 by mailman57
Replied by mailman57 on topic skilsaw 367 type 1
Yes, metal handle. I took care of the guard problem by using a small return spring hooked to lower guard and the frame. My problem now is the worn bronze gear on the blade arbor. This saw was made in late 1950s, and I can’t find a parts manual. Is There a suitable replacement available?

Please Log in or Create an account to join the conversation.

Moderators: MTR-Admin
Time to create page: 0.061 seconds