- Posts: 7
- Thank you received: 0
Sanborn Black Max Air Compressor Slowing Down
- Ozarkwalker
- Topic Author
- Offline
- Fresh Boarder
Less
More
11 years 10 months ago #117
by Ozarkwalker
Sanborn Black Max Air Compressor Slowing Down was created by Ozarkwalker
I have a Sanborn Black Max air compressor. 120 volt 5 hp motor. It has worked fine until yesterday when I started it. It started up fine, but the motor started slowing down as air pressure was building up. My thought is that the capacitors on the motor have gone bad. Any ideas. The oil in the compressor is fine. That is the first thing I checked other than that am I looking at a new motor or something a lot cheaper?
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
11 years 10 months ago #118
by MTR-Admin
Replied by MTR-Admin on topic Sanborn Black Max Air Compressor Slowing Down
Thank you for the inquiry.
Most likely the problem lies with the motor or capacitors. I would have the motor tested as well as both the run and start caps (although the Run Cap is more likely based on the symptom).
I've attached a tech doc on how to test the capacitors (unless you have a capacitor tester handy).
Next, make sure the Belt Tension is not too loose or tight and the pulleys are aligned. You want typically a 1/2" of deflection in the Belt.
Make sure there is no obstructions in the Discharge Tube and in the Pump Head. I've included a tech doc on trouble shooting compressors, hopefully this gives you some assistance.
And please feel free to share the solution here once you find it!
- MTR
Most likely the problem lies with the motor or capacitors. I would have the motor tested as well as both the run and start caps (although the Run Cap is more likely based on the symptom).
I've attached a tech doc on how to test the capacitors (unless you have a capacitor tester handy).
Next, make sure the Belt Tension is not too loose or tight and the pulleys are aligned. You want typically a 1/2" of deflection in the Belt.
Make sure there is no obstructions in the Discharge Tube and in the Pump Head. I've included a tech doc on trouble shooting compressors, hopefully this gives you some assistance.
And please feel free to share the solution here once you find it!
- MTR
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
11 years 10 months ago #119
by MTR-Admin
Replied by MTR-Admin on topic Sanborn Black Max Air Compressor Slowing Down
I should also say, make sure you don't run the unit on an extension cord, this many times can cause this problem.
Thanks!
- MTR
Thanks!
- MTR
Please Log in or Create an account to join the conversation.
- Ozarkwalker
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 7
- Thank you received: 0
11 years 10 months ago #120
by Ozarkwalker
Replied by Ozarkwalker on topic Sanborn Black Max Air Compressor Slowing Down
The ohmmeter only goes up to R*10. According to it both capacitors are open.
Please Log in or Create an account to join the conversation.
- Ozarkwalker
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 7
- Thank you received: 0
11 years 10 months ago #121
by Ozarkwalker
Replied by Ozarkwalker on topic Sanborn Black Max Air Compressor Slowing Down
It was one of the capacitors. A local electric motor repair shop has the one I needed in stock.
Please Log in or Create an account to join the conversation.
- MTR-Admin
- Offline
- Administrator
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
11 years 10 months ago #122
by MTR-Admin
Replied by MTR-Admin on topic Sanborn Black Max Air Compressor Slowing Down
Great to hear you narrowed the problem down! This is a pretty typical problem.
Thanks for posting!
- MTR
Thanks for posting!
- MTR
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.062 seconds