- Posts: 5
- Karma: 2
- Thank you received: 0
Salvaging older Quincy Compressor Model 310 25 - need parts help.
- azhirise
-
Topic Author
- Offline
- Fresh Boarder
-
Less
More
5 years 7 months ago #2949
by azhirise
Salvaging older Quincy Compressor Model 310 25 - need parts help. was created by azhirise
Pressure Switch (tank tapped with NPT ¾”)
Pressure relief valve (about 155? Max 175 psi as tanks is rated to 200 psi)
Check valve (tank tapped with NPT ¾”) (Top center of tank)
Unloader Valve?
Drain valve (tank tapped with NPT 1/2”) (Bottom of tank)
Tank pressure gauge
Manual shut off valve 1” min (tank tapped with NPT 2”)
Compressor rated output 175 psi
Model 310 25
156885 L
Size 3 ½ & 2 x 2 ½
Quincy Compressor Model 310 25
Standard Manchester horizontal 60 gallon tank
ACFM 3.9 to 9.63
SCFM (Standard Cubic Feet per Minute)
ACFM (Actual Cubic Feet per Minute)
I purchase this compressor (Quincy Model 310 25) - minus many parts for scrap metal price. The compressor was rebuilt in the 80's and received little use since then. That is why the previous owner stripped parts off of it. I want to get it back to functioning and use it. Here is a list of the parts I think that I need. Your wisdom and experience in these matters would be greatly appreciated.
Gerald K Koziol
Berthoud Colorado
Pressure relief valve (about 155? Max 175 psi as tanks is rated to 200 psi)
Check valve (tank tapped with NPT ¾”) (Top center of tank)
Unloader Valve?
Drain valve (tank tapped with NPT 1/2”) (Bottom of tank)
Tank pressure gauge
Manual shut off valve 1” min (tank tapped with NPT 2”)
Compressor rated output 175 psi
Model 310 25
156885 L
Size 3 ½ & 2 x 2 ½
Quincy Compressor Model 310 25
Standard Manchester horizontal 60 gallon tank
ACFM 3.9 to 9.63
SCFM (Standard Cubic Feet per Minute)
ACFM (Actual Cubic Feet per Minute)
I purchase this compressor (Quincy Model 310 25) - minus many parts for scrap metal price. The compressor was rebuilt in the 80's and received little use since then. That is why the previous owner stripped parts off of it. I want to get it back to functioning and use it. Here is a list of the parts I think that I need. Your wisdom and experience in these matters would be greatly appreciated.
Gerald K Koziol
Berthoud Colorado
Please Log in or Create an account to join the conversation.
- MTR-Admin
-
- Offline
- Administrator
-
Less
More
- Posts: 1196
- Karma: 15
- Thank you received: 95
5 years 7 months ago #2950
by MTR-Admin
Replied by MTR-Admin on topic Salvaging older Quincy Compressor Model 310 25 - need parts help.
Thanks for the post!
Can you upload a picture of the compressor? This would help.
Also, for the NPT measurements, are you measuring the ID (Inside Diameter) or OD (Outside Diameter) of the threads?
- MTR
Can you upload a picture of the compressor? This would help.
Also, for the NPT measurements, are you measuring the ID (Inside Diameter) or OD (Outside Diameter) of the threads?
- MTR
Please Log in or Create an account to join the conversation.
- azhirise
-
Topic Author
- Offline
- Fresh Boarder
-
Less
More
- Posts: 5
- Karma: 2
- Thank you received: 0
5 years 7 months ago #2953
by azhirise
Replied by azhirise on topic Salvaging older Quincy Compressor Model 310 25 - need parts help.
I had attached a cad drawing of the manufacturers tank specifications and their NPT openings. I have assumed that they mean the inside dimensions - the size of what device will be inserted into the openings.
I will attach more photos of the compressor.
I will attach more photos of the compressor.
Please Log in or Create an account to join the conversation.
- azhirise
-
Topic Author
- Offline
- Fresh Boarder
-
Less
More
- Posts: 5
- Karma: 2
- Thank you received: 0
5 years 7 months ago #2954
by azhirise
Replied by azhirise on topic Salvaging older Quincy Compressor Model 310 25 - need parts help.
more photos
Please Log in or Create an account to join the conversation.
- azhirise
-
Topic Author
- Offline
- Fresh Boarder
-
Less
More
- Posts: 5
- Karma: 2
- Thank you received: 0
5 years 7 months ago #2955
by azhirise
Replied by azhirise on topic Salvaging older Quincy Compressor Model 310 25 - need parts help.
still more photos
Please Log in or Create an account to join the conversation.
- azhirise
-
Topic Author
- Offline
- Fresh Boarder
-
Less
More
- Posts: 5
- Karma: 2
- Thank you received: 0
5 years 7 months ago #2956
by azhirise
Replied by azhirise on topic Salvaging older Quincy Compressor Model 310 25 - need parts help.
even more photos
Please Log in or Create an account to join the conversation.
Moderators: MTR-Admin
Time to create page: 0.124 seconds